-40%
Static Phase Converter, Runs 3 to 5 HP 3-Phase 230V Motors w/single phase power.
Static Phase Converter, Runs 3 to 5 HP 3-Phase 230V Motors w/single phase power.
Static Phase Converter, Runs 3 to 5 HP 3-Phase 230V Motors w/single phase power.
Static Phase Converter, Runs 3 to 5 HP 3-Phase 230V Motors w/single phase power.
Static Phase Converter, Runs 3 to 5 HP 3-Phase 230V Motors w/single phase power.
Static Phase Converter, Runs 3 to 5 HP 3-Phase 230V Motors w/single phase power.

Static Phase Converter, Runs 3 to 5 HP 3-Phase 230V Motors w/single phase power.

$ 105.6

Availability: 100 in stock
  • Horsepower: 3 - 5 HP
  • Suitable Load Types: Easy to Medium Loads
  • Continuous/Minimum Load Horsepower: 3
  • Condition: New
  • Input Current: 22 A
  • Brand: Electronic Controls
  • MPN: ASPC-5
  • Starting/Maximum Load Horsepower: 5
  • Country/Region of Manufacture: United States
  • Operating Frequency: 60 Hz
  • Conversion Type: 1 to 3 Phase
  • All returns accepted: ReturnsNotAccepted
  • Type: Static Phase Converter
  • Mounting Style: Wall Mount
  • Output Voltage: 230 V
  • Output Current: 22 A
  • Input Voltage: 230 V

    Description

    AUcontrols
    Made in USA.
    Static Phase Converter Mod. ASPC-5HD.
    Runs 3 - 5 HP, 3-Phase AC Motor with 208-240 VAC Single Phase Power.
    DESIGNED TO RUN 3-Phase Motors ONLY!
    Run a 3 to 5 HP AC Motor 2230 VAC, AT 2/3 OF MOTOR'S RATED HP, FOR LIGHT to
    MEDIUM LOADS.
    Power Supply: Single Phase 208 - 240 VAC 50/60 Hz.
    Dimensions: 8" x 8" x 4"
    1 Year Warranty.
    IMPORTANT:
    ALWAYS Make sure your Motor's HP is between the Converter's HP!
    DO NOT Install a bigger Converter than your Motor's HP thinking it will give you more power, It will NOT work!
    Nor use a smaller Converter than your Motor's HP, It will NOT work eaither!
    If you have questions please contact us, we'll be happy to assist you with the Phase Converter you need.
    YOU CAN RUN:
    Lathes above 3 HP not fitted with a clutch, Milling & Drilling Machines, for Air compressors compressors, blowers, water pumps, hydraulic pumps, etc. The motor's pulley diameter must also be reduced by 1/3 or a 50% larger motor can be fitted. For heavy starting cycles, frequent starting, instant reversing, etc.
    Just keep in mind the Motor will give ONLY 2/3 of the rated Motor's HP.