EGT Single K-Type Thermocouple Convertor to 0-5V 5volts

Description

EGT Thermocouple Type "K" to 0-5v  Amplifier / Conditioner for Data Logger's
"
SINGLE CHANNEL CONVERTER"
Just released by EGT our new Signal Converter takes any Type "K" Thermocouple and converts its signal to 0-5volt output.
Converter Spec's:
(1) Channel for Type "K" Thermocouple. (T/C Not Included)
Compensated sensor terminals w/ cold junction compensation.(uses any length wire)
Recommended Input Voltage +14.5V to 36V DC.
Output is 4mv/C / 0c = 0v to 1250C = 5.0v
Sealed Electronics to withstand high moisture environments.
Temperature Range 0C - 1250C or 32F - 2282F
Compact and easy to install w/ Velcro or Screw Mount
**Optional EGT connections are available, Consult Factory**
Also available are 2 & 4 channel units and well as thermocouple's!
Most Dataloggers like AEM EMS, Greddy EManage, Motec, Stack, ACR, HRC, Many Dyno's & Industrial Applications have provisions for 0-5v inputs, this device solves the problem with interpreting the thermocouple's millivolt signal.
**Optional EGT connections are available,
"No Charge"
Standard Stripped Leads (Standard)
Staggered Leads w/ Ring Terminals (Optional)
Mini Jack (Optional)
On the thermocouple side of any instrument it is important to use what they call a compensated connector this means that the connector has to be made of the same alloy's as the type used in the a type "K" thermocouple.
Using any other alloy will cause the instruments reading to have an error. To simplify the ordering process EGT has optional Type K connections.
Please let us know which connector is desired at checkout.
(Consult factory for the mating connector)
Here's the link to the Spec Sheet!
http://www.exhaustgas.com/PDF/1813.pdf
If you have any questions feel free to contact EGT @1-800-348-4678
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.